Attic Insulation in Burbank — Same-Day Service, Done Right the First Time

Fast, Reliable Attic Insulation Across Burbank

Attic insulation in Burbank typically runs $1,800 – $4,200 for a full retrofit on a 1,000 – 1,500 sq ft bungalow, with most jobs completed in a single day. Our crews know Burbank’s streets, Burbank’s housing stock, and Burbank’s summer heat. When we get a call from the 91505 or 91506 flats, we know the home before we’ve even seen it: low-pitch roof, original stucco, maybe a flat-roof addition off the back, and an attic that’s been cooking the upstairs bedrooms since June. Call (866) 605-6949 for a free estimate, and we’ll have a specialist at your door within 24 hours, not in the morning when the heat’s already climbing and you’ve spent another night tossing.

Call (866) 605-6949

Why Hollywood Insulation Co Is Burbank’s Preferred Attic Insulation Company

The difference between a general contractor who will “take a look at your insulation” and a dedicated attic insulation specialist shows up the moment the work starts. Hollywood Insulation Co does one trade, every day. That means our technicians know what they’re looking at when they open a hatch in a 1948 bungalow off Chandler and find something that hasn’t been touched since the Truman administration. Our reputation in Burbank has been built one hot upstairs bedroom at a time. Our customers call us back because the diagnosis matched the fix, not because we upsold them a spray foam package they didn’t need.

Noel Camacho leads every project with a simple principle: the home decides the material, not the truck. We’re not a one-brand shop. We install Icynene and Demilec spray foam systems, Owens Corning and GreenFiber blow-in options, and Rockwool mineral wool batts. Eight manufacturer brands, three installation methods, one honest recommendation. For a 1950s bungalow near Magnolia with no attic hatch, that might mean blowing GreenFiber to R-38 through a gable vent. For a hillside home in 91501 with a low-pitch roof, it might mean a radiant barrier under the sheathing plus an air-seal. That specificity is why Burbank homeowners and the remodelers working on Burbank’s older housing stock keep calling us back.

Our response time to Burbank is same-day for emergencies and within 24 hours for free estimates. When a homeowner in the Magnolia Park area calls about a 95°F upstairs bedroom in October, we don’t schedule them out three weeks. We get there, we look at the attic, we tell them what’s really going on, and we quote the work. No pressure. The city’s tight streets and alley-load garages mean we send our crews in service vehicles that can park in Burbank’s residential zones without needing a CDL. We’ve also worked with Burbank contractors on larger remodels, so we know the city’s permit office and what inspectors look for when they walk a post-war single-story.

Radiant Barrier in Burbank

Radiant Barrier in Burbank is often the single highest-impact upgrade you can make on a 1950s home, because it directly attacks the problem that makes Burbank attics miserable: radiant heat gain through the roof deck. On a 102°F afternoon in the 91505 flats, a standard composition shingle roof can push attic air past 150°F. That heat doesn’t need to go anywhere; it radiates straight down through the ceiling. A radiant barrier reflects that heat before it ever enters the attic, which means the insulation below it actually does its job. For Burbank’s dense single-story housing stock, where low-pitch and flat-roof sections leave very little attic air space, this matters more than any single R-value upgrade. In our experience, a radiant barrier alone can drop an upstairs bedroom 8 – 12°F on a hot summer day, before you add a single batt. The cost for a radiant barrier installation in Burbank typically runs $1.50 – $3.00 per sq ft of attic floor area, or $1,200 – $2,800 for a typical 1,200 sq ft home.

Where Radiant Barrier Goes In Low-Pitch Attics

On Burbank’s classic low-pitch roofs, especially the post-war bungalows near the Verdugo foothills, we typically install radiant barrier as a staple-up layer under the rafters rather than on the attic floor. A floor-mounted barrier in a low attic collects dust and stops reflecting. A stapled overhead barrier stays clean and works. For homes with flat-roof additions off Magnolia or Olive, we often pair the barrier installation on the original house section with blown-in insulation in the addition, because the two roof types have completely different heat profiles.

Radiant Barrier vs. More Insulation

A lot of Burbank homeowners think the answer to a hot upstairs is “more R-value.” It’s not always. Once the attic air is 150°F, adding R-30 to R-50 doesn’t change the physics much, the heat is still radiating down. The problem is the roof deck’s temperature, not the insulation’s thickness. The right fix on a low-pitch 91501 home is often a radiant barrier plus air-sealing, with insulation as the third element. We’ve seen homes drop 10 degrees upstairs after a barrier went in, with the same old batts still in place. That’s not a sales pitch, that’s how heat transfer works.

Attic Cleaning Services in Burbank

Attic Cleaning Services in Burbank matter more here than in a tract-home suburb, because Burbank’s older housing stock tends to come with attics that haven’t been opened in 30 years. Homes built for Lockheed and movie-industry workers in the 1940s and 1950s were not designed with modern attic access or ventilation. By the time we get to them, there’s usually a layer of fine Valley dust, old rodent activity, broken vent screens, and in some cases insulation that’s compressed to half its original R-value. Cleaning the attic before insulating is not a courtesy step; it’s a functional requirement. If you blow new GreenFiber or Owens Corning loose fill over a thick layer of dust and old debris, the new material can’t settle evenly, and you’re insulating the dirt, not the ceiling. A full attic cleaning in Burbank typically runs $400 – $900 depending on attic size and debris condition, and it’s usually done the same day as the insulation work.

What Attic Cleaning Covers

We remove old, compromised insulation if it’s present, vacuum or sweep out the accumulated dust and debris, inspect for rodent or pest activity, and check the vent screens. In Burbank’s 1920s and 1930s bungalows, we also check for original wiring that can’t be safely covered. The cleaning step is when we find problems: a cracked rafter, a failed gable vent, an old knob-and-tube run that needs to be addressed before any loose fill goes in.

When Cleanup Needs To Happen Before Insulation

If your attic has seen rodents, the droppings and urine need to come out before anything goes in on top. If you’ve had a roof leak that’s been patched but left stained decking, that area needs to dry and get checked for mold before insulation touches it. And if you’re in a Burbank bungalow that’s been lived in for decades without ever having the attic opened, the cleanup is the honest first step, not an add-on we invented to pad the quote.

Trusted Brands We Service in Burbank

Hollywood Insulation Co installs products from eight recognized manufacturer brands across fiberglass, mineral wool, spray foam, and cellulose. For Burbank customers specifically, we keep stock of Icynene open-cell and closed-cell foam, Demilec spray foam systems, GreenFiber recycled cellulose, and Owens Corning fiberglass. When someone calls us from the 91505 flats about a hot upstairs bedroom, the conversation is “which of these does your attic actually need,” not “here’s what we have on the truck.” That flexibility means we quote the method that fits the roof pitch and the access, and we can usually start within a week of the estimate. For Burbank remodelers and builders, the same portfolio means we can specify insulation that matches the energy code and the client’s budget on a single call. One contractor, one point of contact, no sub-trades. That’s what makes Burbank’s local pros call us instead of the big-box installers.

Common Attic Insulation Problems We See in Burbank Homes

• R-0 attics in original 1940s-1950s bungalows. Burbank’s aircraft-worker boom housing was built before energy codes existed, and we’ve opened attics near Chandler and Buena Vista that had nothing between the ceiling and the roof deck but a layer of 70-year-old dust. The homes look well-kept from the street, but the attic tells a different story.
• Flat-roof additions with zero attic access. Off Magnolia and Olive especially, the common Burbank flat-roof addition often hides an unvented, uninsulated void that makes the back bedrooms swelter from May through October. The fix is often blowing insulation in through a gable vent or cutting a new hatch on the rear slope, because the original builder never provided an opening.
• Original knob-and-tube wiring still live and hot. Homes built between 1920 and 1950 in the 91501 and 91504 flats sometimes still have the original cloth-wrapped wiring in the attic. Loose fill blown over active knob-and-tube is a genuine fire risk, and we flag it every time before recommending a workaround that keeps the home safe and insurable.
• Low-pitch roofs that trap radiant heat. The low-slope roofs common across Burbank’s Spanish-style and bungalow housing stock create shallow attics where air doesn’t circulate. The result is a pocket of 150°F+ air sitting directly on top of the ceiling. Adding batts alone won’t fix it; the roof deck needs a radiant barrier or a different material approach entirely.

Pricing for Attic Insulation in Burbank, CA

We Also Serve Cities Near Burbank

Our Attic Insulation team regularly works in the communities around Burbank too: Universal City, North Hollywood, Glendale, and Studio City. If you’re in one of those areas or anywhere else in the San Fernando Valley, call us at (866) 605-6949 and we’ll get a specialist out. For more on who we are and what we do, see our Attic Insulation in Burbank page.

FAQs About Attic Insulation in Burbank