Insulation Company in Pedley, CA
Blown in insulation is the most common upgrade we install in Pedley, and for good reason: many homes in the 92509 ZIP were built when R-19 attic insulation was considered plenty, and inland Riverside County summers now punish that choice. Pedley sits where the Jurupa Valley traps heat, and attics here routinely hit 140°F-plus on July afternoons. We match the right material to the actual house, not to whatever’s on the truck. If your upstairs rooms bake while the AC runs nonstop, call Hollywood Insulation Co at (866) 605-6949.
Why Pedley Homes Are Different
Pedley’s housing mix tells the story of the work we do here. The unincorporated Jurupa Valley stock includes a lot of mid-century ranch-style single-story homes on generous lots, most of them wood-framed with the original low-R insulation still in place. Some of those older attics have just a few inches of fiberglass batt, sometimes settled to half its rated depth. Newer tract and custom infill homes sometimes have the opposite problem: builders hit the minimum code requirement and stopped, which in a climate that sees summer highs consistently in the 95 to 105°F range means under-insulated for the actual load.
What really separates Pedley from coastal work is the radiant-heat problem. Thirty or forty miles west, insulation is mostly about keeping conditioned air in. Here, it is about stopping the sun’s heat from entering through the roof deck in the first place. Attic temperatures in Pedley and the wider Jurupa Valley routinely exceed 140°F on summer afternoons, and that heat soaks through the ceiling into living space even when the air inside is cool. That is why blown-in fiberglass alone often underperforms here unless it’s paired with the right attic ventilation and, where appropriate, radiant-barrier sheathing. We plan Pedley jobs around that heat soak, not around a generic insulation checklist.
Our Main Pedley Services
Pedley homeowners most often call us for two things: attic insulation to cut summer cooling costs, and spray foam for air sealing and the highest R-value per inch. Each gets its own dedicated Pedley page because each solves a different local problem.
Attic Insulation in Pedley
Most Pedley attics are under-insulated by 40 to 60 percent relative to current Department of Energy recommendations for inland Southern California. We see original mid-century batts compressed under boxes, old loose fill settled to nothing, and additions built without any insulation at all. The fix usually involves air sealing the attic floor, adding ventilation where the eaves are blocked, and bringing the assembly up to R-38 or higher. Full details, including local pricing and the radiant-barrier pairing we recommend for Jurupa Valley heat, are on the dedicated page: Attic Insulation in Pedley.

Spray Foam Insulation in Pedley
Some Pedley homes need more than a thermal upgrade, they need air sealing. Older wood-framed homes here rarely have sealed top plates, and can lights and plumbing penetrations leak conditioned air straight into that 140°F attic. Closed-cell spray foam addresses both the R-value and the air barrier in one application, and we install both Icynene and Demilec systems depending on the structure. The full write-up, including open-cell versus closed-cell guidance for this climate, is here: Spray Foam Insulation in Pedley.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Blown In Insulation in Pedley
Blown in insulation is the workhorse upgrade for Pedley’s older ranch homes because it’s the fastest way to get an under-insulated attic up to a defensible R-value without tearing out ceilings. In the 92509 ZIP, we regularly find attics with R-11 to R-19 of settled fiberglass, and in this climate that means the ceiling becomes a radiator by mid-afternoon. We blow cellulose or fiberglass to a true R-38 or R-49, and we always check attic ventilation at the same time because a 140°F attic will defeat even the best insulation if the heat has nowhere to go. This is the core of our Blown In Insulation work in Pedley.
Cellulose Insulation
Signs you need it
Your existing attic insulation has settled below the top of the ceiling joists, or you feel heat radiating through ceilings on summer afternoons even with the AC running.
What it costs in Pedley
Cellulose blown-in insulation in Pedley typically runs $1.20 – $2.00 per square foot installed, with most 1,200-square-foot attics landing between $1,500 and $2,400.
How we do it
We air seal the attic floor penetrations, then dense-pack or loose-blow recycled cellulose to the specified R-value using a two-person hose team for even coverage.
Blown In Attic Insulation
Signs you need it
Rooms directly under the attic run 8 to 12 degrees warmer than the rest of the house in summer, or your attic has batts that are compressed, animal-damaged, or missing entirely.
What it costs in Pedley
Blown-in attic insulation in Pedley averages $1,200 – $2,200 for a full attic treatment, depending on depth and whether we’re topping off existing material or starting from bare drywall.
How we do it
We remove or level the old material as needed, install baffles at every eave, verify or add venting, then blow fresh insulation to a consistent depth verified with a depth gauge.
Blown In Cellulose Insulation
Signs you need it
Your home has irregular joist spacing, lots of can lights and wiring, or an attic with odd geometry that makes batt installation a poor fit and promises frustrating gaps.
What it costs in Pedley
Blown-in cellulose in Pedley runs $1.20 – $2.00 per square foot, with smaller attics often landing near the top of that range because setup costs spread across fewer square feet.
How we do it
We use a commercial cellulose blower and GreenFiber recycled-content material, working from the farthest eave back toward the hatch so we never trap ourselves or miss a corner.
Loose Fill Insulation
Signs you need it
You need a top-up over existing batts or loose fill that has settled and lost thickness, leaving bare patches visible at the ceiling plane.
What it costs in Pedley
Loose fill insulation top-ups in Pedley typically run $0.90 – $1.50 per square foot, with final pricing tied to how much additional material is needed to hit R-38 or higher.
How we do it
We run a fiberglass loose-fill machine calibrated to the manufacturer’s coverage chart, blowing to a marked depth and checking at least eight points across the attic before we call it done.
What Blown In Insulation Costs in Pedley
| Item | Typical range in Pedley |
|---|---|
| Blown In Attic Insulation | $1,200 – $2,200 per attic |
| Cellulose Insulation | $1.20 – $2.00 per sq ft installed |
| Loose Fill Insulation | $0.90 – $1.50 per sq ft |
What pushes prices up in Pedley is attic access. Older ranch homes here often have narrow scuttle holes or the attic access in a hallway closet, which means slower work and more trips up and down the ladder. We price every job upfront, so the number we quote is the number you pay.
Can blown in insulation be installed in one day in Pedley?
Yes, most Pedley attics are blown in a single day, usually four to six hours for a standard single-story ranch home. Larger attics or jobs that include air sealing and venting may run into a second morning. Call (866) 605-6949 to schedule a walkthrough and we’ll give you a straight answer for your house.
Is cellulose or fiberglass better for Pedley’s heat?
Both work, but cellulose generally performs better in Pedley’s high-heat attic conditions because its higher density resists convective heat movement better than loose fiberglass. The priority is getting to R-38 or R-49 and fixing ventilation at the same time. We’ll recommend the material that fits your attic and budget.
Brands We Service in Pedley
We install eight manufacturer brands across four insulation categories, and the Pedley crews regularly work with Rockwool mineral wool, CertainTeed fiberglass, Icynene spray foam, and Demilec closed-cell systems. Blown-in jobs here lean heavily on GreenFiber recycled cellulose. Most materials are stocked locally, so typical Pedley jobs schedule within the week. See our full line at our brands.
Pricing for Insulation Company in Pedley, CA
| Service | Typical range in Pedley |
|---|---|
| Blown In Attic Insulation | $1,200 – $2,200 per attic |
| Cellulose Insulation | $1.20 – $2.00 per sq ft installed |
| Loose Fill Insulation | $0.90 – $1.50 per sq ft |
| Attic Insulation (full upgrade) | $1,800 – $3,600 per attic |
| Spray Foam Insulation (open-cell) | $1.50 – $3.00 per sq ft |
| Spray Foam Insulation (closed-cell) | $2.50 – $5.00 per sq ft |
| Blown In Fiberglass Insulation | $0.90 – $1.80 per sq ft |
| Blown In Cellulose Insulation | $1.20 – $2.00 per sq ft |
What moves pricing in Pedley is attic condition: access difficulty, whether old material needs to be removed, and whether we need to add or repair ventilation all change the final number. We quote a fixed price after a site walkthrough, so there are no surprises, and no charge for the estimate itself.
Neighborhoods We Serve in Pedley
Pedley is compact, and most of our work here is in the unincorporated Jurupa Valley residential streets north of Limonite Avenue and along the western edge of the 92509 ZIP. We’re familiar with the half-acre lots, the older ranch styles, and the newer infill pockets alike.
- Pedley proper and surrounding Jurupa Valley
- Ranch-style homes along Limonite Avenue corridor
- Custom and tract infill near the Santa Ana River
- Older unincorporated lots east and north of the 60
- Newer developments across the 92509 ZIP
Response time across Pedley is typically same-day or next-day for estimates, and most insulation jobs schedule within five to seven business days.
Service Area – Cities Near Pedley
We serve Pedley and all of the surrounding Jurupa Valley and western Riverside County communities. If you’re next door in Glen Avon, CA, Sunnyslope, CA, or Rubidoux, CA, we cover those neighborhoods too. Our crews also work throughout Riverside, CA, and the wider inland valley. Call (866) 605-6949 to confirm we cover your street.
Serving Pedley, CA — Our Local Coverage Area
We’re based in the Pedley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Insulation Company in Pedley
Estimates in Pedley are usually same-day or next-day. Insulation installation typically schedules within five to seven business days, though smaller blown-in attic jobs can often be slotted earlier if we have a crew already working in the 92509 ZIP. Call (866) 605-6949 and we’ll check the schedule for your street.
Most insulation-only retrofits in unincorporated Pedley do not require a building permit, but if your project includes structural changes or new construction, Riverside County may have requirements. We’ll tell you exactly what applies to your house during the estimate, and we handle all the paperwork when a permit is needed.
Do you work in Pedley’s older ranch homes and newer infill houses?
Yes, and we treat them differently. Older ranch homes in Pedley typically need air sealing, ventilation corrections, and a full insulation top-up. Newer infill often just needs a targeted upgrade to above minimum code. We specify the job based on what the house actually is, not on a standard package. Call (866) 605-6949 for a free estimate on either type.
What happens when you call
- 1A real person answersNo phone trees — talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30–60 min.
- 4You approve before work beginsNothing starts until you say go.
What Pedley Customers Say
"Attic was at maybe R-11 from the 1970s and blown in over the top would have just buried the problem. They removed the old material, air sealed the top plates and penetrations first, then blew in to R-49. The upstairs is a completely different house in August."
— Cole Sullivan"Found and sealed a gap around the chimney chase that was basically an open chimney to the attic."
— Brandon Wong"Work is good and the house is noticeably more comfortable. There was insulation debris left in the hall closet under the attic access that I had to clean up."
— Miguel Garcia