Spray Foam Insulation in Los Angeles — Same-Day Service, Done Right the First Time

Fast, Reliable Spray Foam Insulation Across Los Angeles

Spray foam insulation in Los Angeles typically runs $2.50 – $6.50 per board foot installed, with a standard 1,000-square-foot attic costing $4,200 – $8,800 depending on whether you need open-cell or closed-cell. Most Los Angeles homes we assess are 1920s – 1950s stucco bungalows with attics that hit 150°F by mid-afternoon, and the right foam spec changes everything about how those rooms feel. We work across Koreatown, Echo Park, Silver Lake, Boyle Heights, and South LA every week. Call (866) 605-6949 and we’ll come look at your roof deck, your walls, and your actual conditions before recommending anything.

Call (866) 605-6949

Why Hollywood Insulation Co Is Los Angeles’s Preferred Spray Foam Insulation Company

We’re a dedicated insulation contractor, not a general remodeler who picked up a foam rig last year. Every technician on our Los Angeles crews spends their whole week diagnosing air leakage, thermal bypasses, and R-value shortfalls in the exact housing stock that dominates this city. That matters here because Los Angeles bungalows share specific problems. Low-pitch roofs, minimal attic clearance, lath-and-plaster walls, and west-facing exposures that bake through the afternoon. When we pull up to a 1940s fourplex off Vermont, we know what we’re going to find before we open the hatch.

Los Angeles homeowners call us after they’ve already spent a summer with uneven room temperatures and a utility bill that climbs every July. By the time we arrive, they want someone who can explain why the second bedroom never cools down and whether foam on the roof deck will actually fix it. Noel Camacho runs every Los Angeles job with this starting point: we identify where heat is entering, then we match the material to that path. Sometimes it’s closed-cell on the roof deck. Sometimes it’s open-cell in wall cavities. Sometimes the honest answer is blown-in and the foam would be overkill. We carry all of it and we’ll tell you which one fits.

Response time to Los Angeles is same-week for most assessments, and we quote within days after walking the property. We use Icynene and Demilec spray foam systems because they hold up to the specific abuse this climate dishes out: radiant heat, dry air, and attics that act like ovens from June through October. When someone in Silver Lake calls on a Tuesday about a hot upstairs bedroom, they’re not waiting three weeks to get a number.

Spray Foam Attic Insulation in Los Angeles

Spray foam attic insulation in Los Angeles is most often a question of whether to seal the roof deck or insulate the attic floor. In the South LA and Boyle Heights stucco bungalows we serve, the flat and low-pitch roofs mean the attic is a 12-to-24-inch crawl with no ridge vent, so spray foam has to be applied in tight passes with a short-wand gun rather than walked-on rafters. Once closed, summer attic temps that can top 150°F no longer have an escape path, so we spec closed-cell on the roof deck and never seal a roof without confirming the house can vent elsewhere. If it can’t vent, the foam belongs on the attic floor and the venting gets addressed separately.

Attic spray foam in Los Angeles typically runs $4,200 – $8,800 for a standard bungalow attic, with closed-cell costing more per board foot but delivering higher R-value per inch and better air sealing. That range covers the tight-crawl work that most Los Angeles attics require. You’re not paying for a walkable third floor; you’re paying for technicians who can lay down even passes in a 16-inch space without leaving gaps.

Closed-Cell Roof Deck Sealing

When a Los Angeles roof has no ridge or soffit vent, we don’t foam the deck. Trapping 150°F-plus air under a low-pitch South LA roof cooks the shingles from below and shortens the roof’s life. But on homes where venting exists or can be added at the eaves, closed-cell Icynene or Demilec on the underside of the deck creates a conditioned attic that stops radiant heat before it ever enters the living space.

Open-Cell Attic Floor Applications

For Los Angeles homes where the roof must stay vented, open-cell foam on the attic floor seals the ceiling plane and stops the stack effect that pulls hot air down through every light fixture and wire penetration in the ceiling. Open-cell costs less per board foot and does a better job of sound control, which matters in dense neighborhoods like Koreatown where the neighbor’s AC condenser sits six feet from your bedroom window.

Spray Foam Wall Insulation in Los Angeles

Spray foam wall insulation in Los Angeles homes almost always targets west-facing exposures, because that’s where the afternoon solar gain hits hardest in this sun-drenched basin. In a 1930s or 1940s bungalow with original lath-and-plaster walls, the cavity is often empty or holding paper-faced batts that have slumped to the bottom. Foaming those cavities from the inside means opening the wall, but it changes the room’s temperature behavior immediately, especially when the sun drops toward the ocean and bakes the stucco from 3pm to 7pm.

Wall spray foam in Los Angeles typically runs $2.50 – $4.50 per square foot of wall area when done as part of a remodel with walls opened, and more when we’re working through existing lath-and-plaster. The job involves clearing debris from the stud bays, protecting any wiring that runs through the cavities, and applying open-cell foam that bonds to clean framing. On a 1947 single-story stucco bungalow off East 1st Street in Boyle Heights, we found the attic deck too shallow to walk and the walls with paper-faced batts falling from the studs. Our crew sealed the roof deck in two short-wand closed-cell passes of Icynene and foamed the west-facing wall cavities, keeping clear of the knob-and-tube-era wiring runs we flagged for the electrician. The homeowner stopped losing the afternoon sun through that wall and the AC stopped short-cycling by mid-summer.

West-Facing Wall Cavities

West walls in Los Angeles take a beating that east walls never see. By 4pm on a clear August day, a stucco west wall is hot to the touch and radiating that heat inward for hours after sunset. Foam in those cavities, properly bonded to clean studs, cuts that afternoon heat migration dramatically. This is one of the highest-value upgrades a Los Angeles homeowner can make, especially in older construction where the wall cavity is just an open chimney for heat.

Lath-and-Plaster Compatibility

Foam sprayed over original lath-and-plaster requires preparation. If we spray into a cavity where loose plaster keys and paper-faced batt debris are still clinging to the studs, the foam bonds to the debris instead of the framing and pulls away within a season or two. We clear the cavities first, and we never bury knob-and-tube wiring in foam. Those conductors need air space, and the fix belongs to an electrician before the foam goes in.

Trusted Brands We Service in Los Angeles

Our Spray Foam Insulation team runs Icynene and Demilec systems because they’re two of the most specified spray polyurethane foam brands in North America, and they hold up to Los Angeles’s dry heat and intense UV exposure. We also work with CertainTeed and GreenFiber in the broader insulation lineup, which means when someone calls us about spray foam but the property actually needs a different method, we’re not stuck trying to make foam fit. Los Angeles homeowners appreciate that we’ll tell them when blown-in is the better call for their attic. Parts and material lead times stay short because we stock locally and pull from distributor inventory across the LA basin.

Common Spray Foam Insulation Problems We See in Los Angeles Homes

• Closed-cell roof-deck foam on unvented low-pitch roofs. We see this in South LA repeatedly: a contractor foamed the deck, the attic has no ridge or soffit vent, and now the shingles are cooking from below. The fix is mechanical ventilation or moving the thermal boundary to the attic floor.
• Foam sprayed over knob-and-tube-era wiring. Boyle Heights and the 1920s bungalow tracts still have active knob-and-tube in wall cavities and attics. Burying those conductors in foam leaves them unable to dissipate heat and makes them unbondable. We flag every run and wait for the electrician before spraying.
• Foam applied to unprepared lath-and-plaster cavities. If the stud bays aren’t cleared of loose plaster, paper-faced batt debris, and dust, the foam grabs that layer instead of the framing. It peels back within a year, and the homeowner has paid for foam that’s no longer sealing anything.
• West-facing walls ignored while the attic gets all the attention. Los Angeles heat gain is mostly radiant and mostly from the west. We see homes with a freshly foamed attic where the west bedroom still cooks every afternoon. The attic was only half the problem.

Pricing for Spray Foam Insulation in Los Angeles, CA

We Also Serve Cities Near Los Angeles

Beyond Los Angeles, our crews cover Koreatown, Echo Park, Silver Lake, and Hollywood on the same schedule. If your property sits in one of those neighborhoods or anywhere in the 90005 – 90008 ZIP range, the same technicians and the same price structure apply. Call (866) 605-6949 and we’ll confirm the service area for your street.

FAQs About Spray Foam Insulation in Los Angeles